The fischer stand-off installation system Thermax 16 is a solution for thermally separated fixation in external thermal insulation composite systems (ETICS) and . The fischer stand-off installation system Thermax 8 is a solution for thermally separated fixation in external thermal insulation composite systems (ETICS). When securing heavy loads that are also exposed to high wind loads, the stand- off installation systems Thermax 12 and 16 are the best choice. These are safely .
|Published (Last):||21 July 2015|
|PDF File Size:||2.24 Mb|
|ePub File Size:||18.79 Mb|
|Price:||Free* [*Free Regsitration Required]|
The system consists of a special anchor rod made of zinc-plated steel with a glass-fibre reinforced cone, threaded pins, and anchor sleeves for fixing into perforated brick.
Before in construction field every body were using Bricks and now the trend is Panels. Installation without any special tools.
Insulationstand-offthermally-brokenfischerfixing. High axial compression and bending.
The glass-fibre-reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the fiscjer for any special tools. The approved stand-off insulation made of stainless steel with thermal separation in external thermal insulation composite systems ETICS. Our Panels are Fully Curved at factory and they are ready for installation right away.
– DIY – Thermax
Signs Lighting Letter boxes Motion detectors Downpipes Advantages The stand-off installation allows for the fixture to be adjusted to the exact position required, whereby pressure marks and damage to the ETICS are avoided.
Top Features No thermal bridge due to the anti-cold cone. The cone at the tip of the anchor rod creates a thermal barrier and holds the stainless steel threaded pin for the external fixing. Regularly conducted on the use of Aerocon Panels. The plastic cone creates a thermal barrier between fische fixture and the inner fixture, and offers an energy-optimised fixing.
Qty Add to Fsicher.
Fischer Thermax 10/140 M6 45694
Stand-off installation Thermax 8 and 10 Highest recommended shear loads 1 for a single anchor. Fix ceiling and channels. Apply jointing material and fibre mesh tape to the surface joint. Aerocon Wall Panels are available in a standard width of mm and varying Erect the panels and align. Fischet offered by Vertical Htermax Panels. The drilling method is to be adapted to the building material used.
Absorption of high loads via expansion pressure-free anchorage.
When using chipboard screws with diameter 6,0 mm they have to be reduced to 0,35 kN. Stand-off installation Thermax 8 and 10 Highest recommended tensile loads 1 for a single anchor. Aerocon Panels holds adequate Fire rating.
Cement and sand are not required. Now, the surface is ready for any finish including paint, tiles, wallpaper, textture, tjermax. The Thermax fixes discher loads such as awnings, air-conditioning devices, and satellite systems to concrete, aerated concrete, and masonry from solid and perforated brick. Less labor is required for panels erections.